BROWSE BY EQUIPMENT TYPE

Browse equipment

139 equipment types across 13 groups

All equipmentBrowse every type of gym equipment

Counts cover the whole catalogue. Your selected rack may have fewer matching products.

Back to rack seats & support pads/REP Fitness

REP Fitness / NEW EQUIPMENT

Utility Seat

Photo unavailableView photos at the retailer

Manufacturer photograph · REP Fitness

Manufacturer SKU: PRA-5440

RETAILER OFFER

£229.99

Available to order

Choose your equipment
REP PR-4000 · 5/8-inch system
REP PR-5000 · current series
REP PR-4000 · 80-inch height
REP PR-4000 · 93-inch height
REP PR-5000 · 80-inch height
REP PR-5000 · 93-inch height
Rogue Monster Lite · rack/rig system
REP 1000 Series · rack/rig system
REP Altitude · rack/rig system
REP Apollo · rack/rig system
Eleiko Prestera Power Rack — Black
Body-Solid SPR1000
Body-Solid SPR500
GET RXD RX3 Tornado
Force USA MyRack Base Unit
Powertec Workbench Power Rack (2019)
Rogue S-2 Squat Stand 2.0
Rogue SML-1 Rogue 70" Monster Lite Squat Stand
Rogue SML-2 Rogue 90" Monster Lite Squat Stand
Rogue SML-3 Rogue 108" Monster Lite Squat Stand
Mirafit M3 Strongman Yoke
Mirafit M3 Wall Mounted Power Rack
Mirafit M4 Flat Foot Power Rack
Mirafit M4 Half Power Rack
Mirafit M4 Power Rack and Extension Bay
Mirafit M4 Power Rack with Extension Bay and Functional Trainer
Mirafit M4 Squat Rack
Mirafit M4 Tall Squat Rack with Pull Up Bar
Mirafit M4 Wall Mounted Power Rack
Mirafit M4 Wall Mounted Rig
Again Faster® Evolution Power Rack Plus - Black
Again Faster® Evolution Power Rack Plus - Blue
Again Faster® Evolution Power Rack Standard
Again Faster® Evolution Power Rack Standard Short
Again Faster® Rival Power Rack
Again Faster® Rival Series Half Power Rack
Again Faster® Rival Series Power Rack Cage
Animal Cage
Animal Half Rack
Power Gym
V1 Performance Series Modular Power Rack
V2 Modular Power Rack
V2 Modular Half Rack
Original MRR | Standard Racks
Riot Squat Stand - 1.8m or 2.3m
Bison Series - Freestanding Rig
Wolverson Half Rack
Wolverson Quarter Rack
Wolverson Strongman Yoke Rack
Origin Performance Series Power Rack
Origin Performance Series Half Rack
Origin Performance Back to Back Power Rig
Origin Performance Series Half Rack 3 in 1
Origin Performance Series Wall Mounted Squat Rack
View at REP Fitness UKChecked 21 Oct 2026, 04:30. Final price and availability are confirmed by the retailer.
About this product

Full description at REP Fitness ↗

Compatibility

See 6 compatible racks
REP PR-4000 · 5/8-inch systemManufacturer statement
Works with your equipment

REP expressly supports the PR-4000’s 47-inch exterior upright width and supplies four 5/8-inch plus four 1-inch mounting pins. This is a shared UK kit, not an absent 4000 variant.

Use the specified supplied mounting pins: PR-4000 rack, Flip-Down Safeties and ISO Arms use 5/8-inch Band Pegs; Utility Seat installation on compatible Spotter Arms uses one-inch pins.

Check support position, rack alignment, cable clearance and the exact installed accessory.

For Utility Seat use on Spotter Arms, the rack must be floor-bolted or stabilized with Front Foot Extensions.

The Utility Seat leg-press arrangement requires installed compatible ISO Arms and cannot coexist with the Rear Base Stabilizer, Lat Pulldown & Low Row or Ares.

The documented Band Peg storage arrangement requires a six-post rack without Ares or Athena; remove the Utility Seat Pad before storage.

Sources
REP Fitness — manufacturer evidence: Utility Seat
REP PR-5000 · current seriesManufacturer statement
Works with your equipment

Manufacturer expressly supports PR-5000; mounting depends on suitable uprights/safeties/arms.

Manufacturer support depends on the exact version and configuration described below.

PR-5000 use requires 1-inch Band Pegs.

Seat pad is optional; support arrangement and movement-specific clearance matter.

  • Current PR-5000/V2 only; original alternating-hole V1 and other REP series are separate systems.
Sources
REP Fitness — manufacturer evidence: Utility Seat
REP PR-4000 · 80-inch heightManufacturer statement
Works with your equipment

REP expressly supports the PR-4000’s 47-inch exterior upright width and supplies four 5/8-inch plus four 1-inch mounting pins. This is a shared UK kit, not an absent 4000 variant.

Use the specified supplied mounting pins: PR-4000 rack, Flip-Down Safeties and ISO Arms use 5/8-inch Band Pegs; Utility Seat installation on compatible Spotter Arms uses one-inch pins.

Check support position, rack alignment, cable clearance and the exact installed accessory.

For Utility Seat use on Spotter Arms, the rack must be floor-bolted or stabilized with Front Foot Extensions.

The Utility Seat leg-press arrangement requires installed compatible ISO Arms and cannot coexist with the Rear Base Stabilizer, Lat Pulldown & Low Row or Ares.

The documented Band Peg storage arrangement requires a six-post rack without Ares or Athena; remove the Utility Seat Pad before storage.

Sources
REP Fitness — manufacturer evidence: Utility Seat
REP PR-4000 · 93-inch heightManufacturer statement
Works with your equipment

REP expressly supports the PR-4000’s 47-inch exterior upright width and supplies four 5/8-inch plus four 1-inch mounting pins. This is a shared UK kit, not an absent 4000 variant.

Use the specified supplied mounting pins: PR-4000 rack, Flip-Down Safeties and ISO Arms use 5/8-inch Band Pegs; Utility Seat installation on compatible Spotter Arms uses one-inch pins.

Check support position, rack alignment, cable clearance and the exact installed accessory.

For Utility Seat use on Spotter Arms, the rack must be floor-bolted or stabilized with Front Foot Extensions.

The Utility Seat leg-press arrangement requires installed compatible ISO Arms and cannot coexist with the Rear Base Stabilizer, Lat Pulldown & Low Row or Ares.

The documented Band Peg storage arrangement requires a six-post rack without Ares or Athena; remove the Utility Seat Pad before storage.

Sources
REP Fitness — manufacturer evidence: Utility Seat
REP PR-5000 · 80-inch heightManufacturer statement
Works with your equipment

Manufacturer expressly supports PR-5000; mounting depends on suitable uprights/safeties/arms.

Manufacturer support depends on the exact version and configuration described below.

PR-5000 use requires 1-inch Band Pegs.

Seat pad is optional; support arrangement and movement-specific clearance matter.

  • Current PR-5000/V2 only; original alternating-hole V1 and other REP series are separate systems.
Sources
REP Fitness — manufacturer evidence: Utility Seat
REP PR-5000 · 93-inch heightManufacturer statement
Works with your equipment

Manufacturer expressly supports PR-5000; mounting depends on suitable uprights/safeties/arms.

Manufacturer support depends on the exact version and configuration described below.

PR-5000 use requires 1-inch Band Pegs.

Seat pad is optional; support arrangement and movement-specific clearance matter.

  • Current PR-5000/V2 only; original alternating-hole V1 and other REP series are separate systems.
Sources
REP Fitness — manufacturer evidence: Utility Seat

Check the model, version and fitting instructions, and follow the manufacturer’s load limits. Likely and possible fits still need checking before you buy.

Specifications

Manufacturer load rating
453.59 kgSource ↗

Key details not recorded

Rack box section
Not recorded
Pin diameter
Not recorded
Bracket internal width
Not recorded
Locking method
Not recorded
Hole spacing
Not recorded
Load rating scope
Not recorded
Check the manufacturer’s specifications ↗

Community experience

Community ratings aren’t available here yet.

How we check compatibility